The Replacements free essay sample

The Replacements are finally growing up, for better or worse. The AMats played at the Orpheum Theatre in February to a mixed crowd. The boys have tamed considerably from their younger days. Slim Dunlap, guitarist, rarely even faced the audience. Towards the end, Tommy Stinson, bassist and best dressed musician of any decade, performed some splits in the air, but that was as wild as it got. As usual, there were some pauses between songs when they were deciding what to play. On the whole, though, it was a well structured show. The bands new drummer, Steve Foley, fit in adequately, but the audience knew who was still running the show: The Replacements frontman Paul Westerburg. As for the material played, most songs were from their latest release, All Shook Down. The band played a few older tunes, and even ventured into a couple of almost acoustic bluesy numbers. The souped-up version of Talent Show and Bent Out of Shape were something to hear. We will write a custom essay sample on The Replacements or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Why dont the AMats play with such fierceness and vitality on their albums? The audience was primarily a thirtysomething crowd. There was a lot of head-bobbing and toe-tapping, but not the kind of things one sees at a rock and roll concert. One raucous group of boys had the audacity to stand up. The good news is The Replacements havent broken up and still know how to rock, if only in concert. The bad news is their fans have grown too old to remember what live shows are, and how to behave. n

gays in the military essays

gays in the military essays The main thesis of this book is really not stated but rather it is really a given, to go to learn more about the moon. Alan Shepards ear infection had flared up, therefore his crew was bumped from the primary flight crew to a later mission, and instead Jim Lovells crew was bumped up to the primary flight crew for the Apollo 13 mission. Two days before the scheduled Apollo 13 mission. Blood work came back from the flight surgeon and according to the surgeon, ken Mattingly das the measles and everyone had been exposed to it. All of the other astronauts had been exposed to it and have had it except for Ken. Naturally Ken was extremely devastated and shocked. So the man that replaced Ken as the navigator was a back-up crewman whose name was Jack Swagart, Jack was a little rusty with the controls since he had not practiced for the past two weeks. Soon after the launch of the Apollo 13 rocket, there was a big problem with the number 5 main engine cutoff, but mission control said there would be no big problem unless there was a loss of another engine. Soon thereafter, Jack was in charge of stirring the oxygen tanks and he did so, but something incredibly bad went wrong. Thats when the famous term, Houston, we have a problem, was derived from that very oxygen stir. Everything was in complete disarray and everyone was so confused. Of the 3 total oxygen tanks, two of then were completely down and not giving any kind of reading whatsoever. Some of the flight control crew just reasoned with themselves and just thought that there was a problem with the instruments reading. But Gene Crantz, the head of mission control, knew that it was a lot more than just a wrong instrument reading, he Thought it was really bad. Since the crew was running out of valuable time and oxygen, a man in flight control suggested that they close the reaction valves because it is the only way out. By closing t...

Tension between Idealism and Naturalism Assignment

Tension between Idealism and Naturalism - Assignment Example Naturalism involves the observation of science and relevant impact of it to the society. Naturalism is an ideology that everything in the universe is a product of physical stuff or nature. It shows that there is nothing supernatural in the world, and everything could be explained using application of hard and soft sciences. It is a method of truth-seeking within the society and has an impact on the public policy. It doesn’t mean the denial of human spirituality but an embrace of real spirituality. Naturalism clashes with idealism in the sense that, it suggests humans are like stardust and their atoms exchanged with the rest of the Earth system. It connects humans to nature and shows the sense of its feeling to the universe. The greatest Greek artist Praxiteles used the idealism to explain the charm of his work to the society by representing the god Hermes holding the young Dionysus on his arm playing with him. The idea shows the Greek art expansion within a short period. In Praxiteles works, there are no traces of rigidity but depicts that god stands before us in a relaxed pose that does not impair his dignity. Praxiteles shows the society the hinges of the body to improve the understanding and clarity of his work. He wants to bring to bring to reality in his idealistic styles the impression of a living body in all its grace and beauty. It is important to understand that Praxiteles and other Greek artists achieved the Hermes beauty through knowledge. Hence a quote â€Å"no living body quite as symmetrical, well-built and beautiful as those of the Greek status†.

Kouros Essay Example | Topics and Well Written Essays - 250 words

Kouros - Essay Example This is because of the fact that Kouros statues usually exhibit a supreme form of geometric symmetry, reminding us of the realism and naturalism of the ever famous artworks of the Renaissance Era later in the history of Europe, from which the artworks from this period of Greece became an inspiration. From the measures of the eyes and the face, to the muscles of the body, it can be seen that almost all of the components are very proportionate and exact with regards to the symmetries of the body of a real male youth. In addition to this, most of the Kouros statues usually pose in a certain form: a standing pose with â€Å"their left leg moved forward, their arms close to their bodies touching the side of their thighs...† all depicted â€Å"as simple geometric forms† (Ancient-Greece.org n. p.). One of the main references for the artists to gain symmetry in creating Kouros without utilizing a rigid measurement system was through appropriating proportions in the Kouros using â€Å"heads:† in fact, â€Å"several Kouros exhibit the 1:7 head:body proportions† (Ancient-Greece.org n. p.). Works Cited Ancient-Greece.org. â€Å"Kouros.† Ancient-Greece.org. Ancient-Greece, n. d. Web. 7 May 2011.

Free Energy Research Paper Example | Topics and Well Written Essays - 2500 words

Free Energy - Research Paper Example Renewable sources of energy are those sources that can be replenished. Making a transition towards more renewable forms of energy would result in independency from local sources of energy and a more decentralized production of energy that is less vulnerable to supply cutoffs. Solar energy can be harnessed by concentrating solar power (CSP) or photovoltaic (PV) technology. The economic potential in industrialized countries, and the shift towards more renewables-intensive industry in both the US and China, is an optimistic sign for solar energy. Sustainable development is a hot topic in the world of politics today. The reason why it has attracted so much attention signifies a looming crisis and the repercussions it would have on people and the environment both. Numerous summits and conferences have been conducted and hundreds of organizations all over the world have met and discussed solutions to the predicament the world faces if it continues to use its energy sources the way it is doing now. The contours of the reason for taking such steps are worth pointing out. The population of the world is increasing at a rapid rate and has tripled over the past seven decades. It had reached an alarming figure of 6 billion at turn of the twentieth century. The rapid increase in the population does not come without its share of problems. Mankind is plunged into a yet deeper abyss of poverty, scarcity of resources and shortage of non-renewable energy reserves. Stocks of resources are being depleted swiftly. Where people in many developed countries have taken energy for granted, the developing countries are facing the brunt of the global energy crisis. The environment is deteriorating due to deforestation, increase in the greenhouse gases, extinction of species and climate changes. Increasing population has caused a dearth of food in many poor countries, where thousands do not have access to clean drinking water and are suffering from

Alcohol Composition Analysis

Alcohol Composition Analysis ALCOHOL Chemical Composition (ingredients) of 4 types of alcoholic beverages: The ingredients differ according to each beverage but there are a couple that are available in all of them, these are water and ethanol. These two ingredients are essential in every alcoholic beverage. Champagne can only be made from white Chardonnay grapes and red Pinot Noir and Pinot Meunier grapes. It’s usually a blend of two or three of the grapes, but is sometimes just made from one (though rarely is Champagne made from just Pinot Meunier). Champagne made entirely from Chardonnay is called â€Å"blanc de blancs† (meaning white wine from white grapes), and Champagne made entirely from Pinot Noir is called â€Å"blanc de noirs† (meaning white wine from black grapes). Even though black grapes are used, the wine itself is never red. The skins (where the pigment resides) are removed immediately after the grapes are pressed, which keeps the juice clear. The only exception is with rosà © Champagne. Rosà © can be produced by leaving the skins in the juice just long enough to tint it, or by producers adding red Pinot Noir wine directly to the blend. This second method allows them to create the same color each year. Carbon dioxide is added in the process which cre ates the fizzy bubbles. Vodka is usually made from rye or potatoes if it is from Eastern Europe and molasses from other parts of the world. It contains flavors derived from wheat, grain or starch. Apart from the main raw material, the other major constituent of your bottle of Vodka is water. Over 60% of your bottle is composed of water, so its purity is of utmost importance to the taste of your vodka. Quite an elaborate purification process is undertaken. Tequila is made with the fermented sap of the blue agave plant; tequila is produced in and around the town of Tequila in Mexico’s Jalisco province. Many superior brands of tequila are made entirely from Blue Agave, and will say so on the label. Tequila can also be made with a mixture of agave and other ingredients, like sugarcane—these products are called mixto tequilas. Malt whisky must contain no grain other than malted barley and is traditionally distilled in pot stills. Grain whisky may contain unmalted barley or other malted or unmalted grains such as wheat and maize (corn) and is typically distilled in a continuous column still. Color and flavoring chemicals are added to create that unique color and taste Methods and Procedures used in the production of alcoholic beverages: If the sparkling wine is produced outside of Champagne, France, but is made by the French Method, it is usually labeled Mà ©thode Champenoise. This is true of most American sparkling wines. Mà ©thode Champenoise, which is the method used in Champagne, involves several distinct steps. The key reaction of winemaking is alcoholic fermentation, the conversion of sugar into alcohol and carbon dioxide by yeast. The maximum amount of alcohol attained through alcoholic fermentation is about 15% because the yeast cells are killed by high alcohol concentration. The maximum alcohol content can be determined by multiplying 0.55 times the percent sugar initially present in the grape juice before fermentation. For example, if 24% sugar is initially present, about 13% (0.55 x 24) alcohol will be realized. Most still wines (i.e., table wines) contain 12 to 14% alcohol. The key process in producing Champagne is a SECOND fermentation that occurs in a sealed bottle. Theoretically, vodka can be made from almost any fermentable organic material from whey to molasses. Absolut Vodka, however, is made solely from grain, which more than 400 years of tradition has proven to produce the best and purest vodka possible. Absolut Vodka uses a special method of distillation that retains a smooth grain character and is extremely low in unwanted by-products. A few thousand years ago, someone made the bright discovery that when deprived of oxygen, the yeast cell turns sugar into carbon dioxide and ethanol. Fermented beverages are born. These beverages were eventually distilled, giving us dozens of different spirits, one of which is vodka. Fermentation is an extremely delicate and complicated process where the yeast cell converts the sugar in the mash to ethanol. The result is a mixture with an 8% alcohol content and a hundred or so by-products, some unpleasant tasting, some harmful. A concern for quality from the very beginning of the production process minimizes these impurities using only high quality grain, preparing the grain, safeguarding against bacteria and carefully controlling the fermentation process. Virtually all remaining impurities are removed in the distillation and rectification. Turning the fermented grain mash to vodka takes distillation. The principle has remained unchanged ever since it was discovered over a thousand years ago. There are two kinds of distillation: batch distillation and continuous distillation. Batch distillation is an age-old method used for many types of spirits. Refined to a high degree of sophistication, this method is still used in areas like Cognac and the Scottish highlands to make cognac and whisky. Absolut Vodka, however, is distilled using the second method, continuous distillation. This type of distillation builds on the same laws of physics as batch distillation. The essential difference is that the spirit is cycled back and forth producing a very pure final product. Continuous distillation turns the 8% fermented mash into crude spirit with an alcohol concentration by volume of 85-90% (170-180 proof). The last step is rectification, a method of removing unwanted by-products introduced over a century ago by the man on the bottles medallion Lars Olsson Smith. The crude spirit passes through a number of columns, each designed to remove a different set of impurities. One column extracts unpleasant tasting solvent compounds; another removes fusel oil; a third methanol; a fourth concentrates the spirit 96% pure alcohol by volume and extremely low in impurities. It is here we are faced with the dilemma of vodka production distillation and rectificati on technology have advanced so far towards producing absolutely pure vodka that it has also succeeded in removing trace elements that give vodka the character of the raw material from which it is made. Absolut Vodka has solved this dilemma by, parallel to the main distillation, producing a spirit where the goal is to retain the fine character of the grain. The final composite spirit, produced at or above 95% alcohol by volume (190 proof), has that unique smooth and fine character. Exactly how this is done is a well-kept secret. The process of making tequila begins with the jima, the harvest, and the jimadores, those responsible for growing and eventually harvesting the agave plant. The plant will be weighed, cut up in halves or quarters, and cooked. The modern method involves using steel pressure cookers called autoclaves. The latter approach cooks the plant faster. Fortunately, flavor doesnt vary with either process. Agave is cooked to transform starches into sugars, which will then become transformed into alcohol. To extract the agua miel, or honey water, the cooked fruit passes through grinding blades. Fibers are sprayed with water, ensuring all sugars are released. Leftover fibers, known as bagazo, are generally used as fertilizer for agave fields. The juices are now ready to be fermented. This is each tequila starts to acquire its unique taste and classification. If the producer wants 100% agave tequila, then the juice passes straight to fermentation vessels. However, if he wants mixto tequila (not 100 % agave tequila), then the agua miel (honey water) must be placed in formulation tanks. Sugarcane or molasses sugar are then added to the juice. Only then can the mixto be placed in fermentation vessels. Now’s the time alcohol begins to appear. Producers will introduce yeasts. These can either be chemical catalysts or natural ingredients. The tanks are lightly heated and carbon dioxide is released, giving the agave juice 5% alcohol content per volume. The mosto, or fermented agave juice, is finally ready for distillation. The juice will be heated to alcohol’s vaporization point and then cooled and condensed to create ordinario (ordinary in English). Tequila is distilled to increase its alcohol content. Becomes tequila blanco. You could try to drink this ordinario, but chances are you’d be blinded and intoxicated afterwards! That is why Mexican law requires all tequila to be distilled twice. The mosto can be distilled three or even four times for top-shelf tequil a. The first distillation will remove all â€Å"heads† and â€Å"tails†, the first and last portions of the distilled product. These contain bad alcohols and other impurities, which is why they must be discarded in favor of a quality (and safe) drink. A second distillation determines the percent of alcohol the tequila will have. Premium tequila will aim for 40% alcohol per volume. A bulk, mixto, or lower quality spirit instead aims for 55% alcohol per volume, which will be later diluted with purified water. Tequila then will be aged depending of the final product that is wanted. There are five stages in the production of whiskey, malting, mashing, fermentation, distillation and maturation. Barley contains starch and it is this starch which needs to be converted into soluble sugars to make alcohol. For this to occur, the barley must undergo germination and this first part of the process is called malting. Each distiller needs a type that produces high yields of soluble sugar. The barley is soaked for 2-3 days in warm water and then spread on the floor of a building called a malting house. When the barley has started to shoot, the germination has to be stopped by drying it. The barley is now called malt and this is ground down in a mill, with any husks and other debris being removed. Now we begin the â€Å"mashing† step. The ground down malt, grist, is now added to warm water to begin the extraction of the sugars. The liquid combination of malt and water is called the mash. It is put into a large vessel called a mash turn and stirred for several hours. The liquid that comes out of that is called wort. This process is normally carried out three times with the water temperature being increased each time to extract the maximum amount of sugar. Only wort from the first two times is used. The third lot is put back into the next batch of new grist. Any residue, such as husks, is called draff. This is collected and used in the production of farm feed. â€Å"Fermentation† begins when the wort is cooled and passed into large tanks called washbacks. These are traditionally made of wood, but now a number of distilleries use stainless steel. Here the yeast is added and the fermentation begins. The yeast turns the sugars that are present into alcohol. As with the barley and water, the distiller will carefully select the strain of yeast that they use and it can also have a small effect on the final flavor of the spirit. The fermentation normally takes around 48 hours to run its natural course, although some distilleries will let it go fo r longer so as to create further characteristics that they require. The liquid at this stage is called wash and is low in alcohol strength (between 5-10% ABV), like beer or ale. Alcohols from the beginning of the distillation (called foreshots) are very high in alcohol level and very pungent. Alcohols from the end (called feints) are weak but also pungent. It is only the alcohol from the middle or heart of the distillation that is used and this is skillfully removed by a stillman and collected through the spirit safe. The foreshots and feints are then mixed with the next batch of low wines and re-distilled. The heart is the spirit that is then taken to be matured and that will become whisky. This heart has an alcoholic strength of 65-70% ABV. The final step is â€Å"maturation†. The spirit is put into oak casks and stored. The most common types of oak casks are those that have previously been used in the American bourbon and Spanish sherry industries. The spirit must mature i n casks for a minimum of three years before it is legally allowed to be called whisky in Scotland. During maturation, the flavors of the spirit combine with natural compounds in the wood cask and this gives the whisky its own characteristic flavor and aroma. Why do people drink? People resort to alcohol for many reasons. Some people drink it because they like the taste and feeling that alcohol gives them

Measure For Measure :: essays research papers

Shakespeare's Measure for Measure can be seen as an early account of sexual harassment. While the issue of women's rights had hardly been explored at the time the play was first performed, Measure for Measure touches on issues of sexuality, independence, and the objectification of women. Despite these serious issues, the play is considered a comedy, and the story it tells is filled with amusing characters as well as broad sociological questions. The plot centers around the fate of Claudio, who is arrested by Lord Angelo, the temporary leader of Vienna. Angelo is left in charge by the Duke, who pretends to leave town but instead dresses as a friar to observe the goings-on in his absence. Angelo is strict, moralistic, and unwavering in his decision-making; he decides that there is too much freedom in Vienna and takes it upon himself to rid the city of brothels and unlawful sexual activity. Laws against these behaviors and institutions already exist, and Angelo simply decides to enforce them more strictly. Claudio is arrested for impregnating Juliet, his lover, before they were married. Although they were engaged and their sexual intercourse was consensual, Claudio is sentenced to death in order to serve as an example to the other Viennese citizens. Isabella, Claudio's sister, is about to enter a nunnery when her brother is arrested. She is unfailingly virtuous, religious, and chaste. When she hears of her brother's arrest, she goes to Angelo to beg him for mercy. He refuses, but suggests that there might be some way to change his mind. When he propositions her, saying that he will let Claudio live if she agrees to have sexual intercourse with him, she is shocked and immediately refuses. Her brother agrees at first but then changes his mind. Isabella is left to contemplate a very important decision. Isabella is, in a way, let off the hook when the Duke, dressed as a friar, intervenes. He tells her that Angelo's former lover, Mariana, was engaged to be married to him, but he abandoned her when she lost her dowry in a shipwreck. The Duke forms a plan by which Isabella will agree to have sex with the Angelo, but then Mariana will go in her place. The next morning, Angelo will pardon Claudio and be forced to marry Mariana according to the law. Everything goes according to plan, except that Angelo does not pardon Claudio, fearing revenge.

Questionnaire

QUESTIONNAIRE It is a research instrument consisting of a series of questions and other prompts for the purpose of gathering information from respondents. Although they are often designed for statistical analysis of the responses, this is not always the case. The questionnaire was invented by Sir Francis Galton. It refers to paper and pencil data gathering method by letting the subject or respondent complete the questionnaire before the researcher or his representative, or it can be mailed Questionnaires have advantages over some other types of surveys in that they are cheap, do not require as much effort from the questioner as verbal or telephone surveys, and often have standardized answers that make it simple to compile data. However, such standardized answers may frustrate users. Questionnaires are also sharply limited by the fact that respondents must be able to read the questions and respond to them. Thus, for some demographic groups conducting a survey by questionnaire may not be practical. Questionnaire is also the most commonly used tool to generate data. Sometimes, it is called the survey form. TYPES A distinction can be made between questionnaires with questions that measure separate variables, and questionnaires with questions that are aggregated into either a scale or index. Questionnaires within the former category are commonly part of surveys, whereas questionnaires in the latter category are commonly part of tests. Questionnaires with questions that measure separate variables could for instance include questions on: * preferences (e. g. political party) * behaviors (e. g. food consumption) * facts (e. g. gender) Questionnaires with questions that are aggregated into either a scale or index include for instance questions that measure: * latent traits (e. g. personality traits such as extroversion) * attitudes (e. . towards immigration) * an index (e. g. Social Economic Status) Question types Usually, a questionnaire consists of a number of questions that the respondent has to answer in a set format. A distinction is made between open-ended and closed-ended questions. An open-ended question asks the respondent to formulate his own answer, whereas a closed-ended question has the respondent pick an answer from a given number of options. The response optio ns for a closed-ended question should be exhaustive and mutually exclusive. Four types of response scales for closed-ended questions are distinguished: * Dichotomous * Nominal-polytomous * Ordinal-polytomous * (Bounded)Continuous A respondent's answer to an open-ended question is coded into a response scale afterwards. An example of an open-ended question is a question where the testee has to complete a sentence (sentence completion item). What Are the Criteria of a good Questionnaire? 1. The language must be clear. 2. The content of the question must be specific. . The question should show singleness of purpose. 4. The question must be free from assumptions. 5. The question must be free from suggestions. 6. The question should have linguistic completeness and grammatical consistency. Questionnaire administration modes Main modes of questionnaire administration are: * Face-to-face questionnaire administration * Paper-and-pencil questionnaire administration * Computerized questionnaire administration * Adaptive computerized questionnaire administration

All About Wireless Electricity

All About Wireless Electricity Wireless electricity is quite literally the transmission of electrical energy without wires. People often compare the wireless transmission of electrical energy as being similar to the wireless transmission of information, for example, radio, cell phones, or wi-fi internet. The major difference is that with radio or microwave transmissions, the technology focuses on recovering just the information, and not all the energy that you originally transmitted. When working with the transport of energy you want to be as efficient as possible, near or at 100 percent. Wireless electricity is a relatively new area of technology but one that is rapidly being developed. You may already be using the technology without being aware of it, for example, a cordless electric toothbrush which recharges in a cradle or the new charger pads that you can use to charge your cell phone. However, both of those examples while technically wireless do not involve any significant amount of distance, the toothbrush sits in the charging cradle and the cell phone lies on the charging pad. Developing methods of efficiently and safely transmitting energy at a distance has been the challenge. How Wireless Electricity Works There are two important terms to explain how wireless electricity works in, for example, an electric toothbrush, it works by inductive coupling and electromagnetism. According to the Wireless Power Consortium, Wireless charging, also known as inductive charging, is based on a few simple principles. The technology requires two coils: a transmitter and a receiver. An alternating current is passed through the transmitter coil, generating a magnetic field. This, in turn, induces a voltage in the receiver coil; this can be used to power a mobile device or charge a battery. To explain further, whenever you direct an electrical current through a wire there is a natural phenomenon that occurs, that a circular magnetic field is created around the wire. And if you loop/coil that wire that wires magnetic field gets stronger. If you take a second coil of wire that does not have an electrical current passing through it, and place that coil within the magnetic field of the first coil, the electric current from the first coil will travel through the magnetic field and started running through the second coil, thats inductive coupling. In an electric toothbrush, the charger is connected to a wall outlet that sends an electric current to a coiled wire inside the charger creating a magnetic field. There is a second coil inside of the toothbrush, when you place the toothbrush inside of its cradle to be charged the electric current passes through the magnetic field and sends electricity to the coil inside the toothbrush, that coil is connected to a battery which gets charged. History Wireless power transmission as an alternative to transmission line power distribution (our current system of electric power distribution) was first proposed and demonstrated by Nikola Tesla. In 1899, Tesla demonstrated wireless power transmission by powering a field of fluorescent lamps located twenty-five miles from their power source without using wires. As impressive and forward thinking as Teslas work was, at that time is was actually cheaper to build copper transmission lines rather than build the type of power generators that Teslas experiments required. Tesla ran out of research funding and at that time a practical and cost efficient method of wireless power distribution could not be developed. WiTricity Corporation While Tesla was the first person to demonstrate the practical possibilities of wireless power in 1899, today, commercially there is little more than electric toothbrushes and charger mats available, and in both technologies, the toothbrush, phone, and other small devices need to be extremely close to their chargers. However, an MIT team of researchers led by Marin Soljacic invented in 2005 a method of wireless energy transmission for household use that is practical at much greater distances. WiTricity Corp. was founded in 2007 to commercialize the new technology for wireless electricity.

Falling by Anne Povoost essays

Falling by Anne Povoost essays My feet are tangled up in something, but I dont know what Lucas complains. By the end of the novel do you think he knows? In the novel Falling by Anne Povoost Lucas Beigne, the grandson of a Felix who helped the nazis in the war, gets caught up in the neo-nazism that has struck his small town of Montourin in Belgium. These neo-nazis headed by the persuasive and cunning Benoit persuade Lucas into their beliefs and before he knows it he became entrapped deeper and deeper throughout the novel. His naive mind blinds him from this and it is not until towards the end of the novel that he begins to relise exactly what his feet have become tangled in. It all started when Lucas decided to go out and purchase a gun, the start of his immature plight that lead to him to being tangled up in all sorts of trouble. Enter Benoit, a wealthy son with a quick mouth and an opinion on everything followed with praise. For the young Lucas he was a dream come true to fill his boring holidays and the complements like such a sense of responsibility went straight to Lucas head. Benoit certainly had a talent for persuading weaker people and Lucas in particular because of his grandfather was a prime target for Benoit who knew exactly how to exploit his naivety and use him to keep himself out of trouble. As Lucas continued seeing Benoit more throughout his holidays and his presence and his very engaging opinions drew Lucas closer towards neo-nazism, his feet became tangled further. The whole time at the back of Lucas mind he always new what Benoit was up to was wrong and although he questioned it dont you think violence is going too far he never strayed or left Benoits side until it was too late. Lucas was too feeble to make a decision himself, and the more he stayed in Benoits company the more Benoit made him do so that he was so far in he couldnt get out, but he managed ...

A critical investigation of the effects of using different learning Essay

A critical investigation of the effects of using different learning styles in swimming in KS1 - Essay Example The activity of swimming is a preventative learning experience that not only teaches a sport to children, but prepares them for the dangers of water Even though it may seem that water is a benign space, the truth is that it accounts for a significant number of deaths per year. Cultural disparities in infrastructure has caused some groups to have less access to swimming, thus putting them at higher risk for incidents. Swimming is also a social space, a place in which a natural hierarchy is developed and in which an unspoken set of rules govern behavior. Therefore, in creating curriculum that includes swimming, a social, safety, and culturally relevant system of skills is given to those participating in the educational venue. The ASA School Swimming Strategy Because of the many reasons for the advantages of having a swimming educational curriculum, it is crucial to critically evaluate the nature of swimming instruction as supported by the state. The ASA has identified four key elements that should be addressed where swimming is concerned: To ensure that everyone has the opportunity to learn to swim To ensure that everyone has the opportunity to enjoy swimming or water based fitness activities for health and fun throughout their lives To ensure everyone achieves their different personal goals throughout their lifetime To ensure we achieve gold medal success on the world stage (ASA) The problem with these objectives is that they skip the most crucial objective, which is to provide instruction that asserts the safety issues that must be addressed where water is concerned. ... This is an odd construction of focal points for a strategy that intends to cover the needs of all the participants in the program. While the strategy lists this a secondary focus, that it is listed without the focus of safety included is a quandary. The WHO (World Health Organization) has determined that 400,000 to 700,000 people drown each year at a worldwide level. There are a great deal of issues that affect the nature of drowning potential, including race, age, sex and the participation in instructions on water safety and swimming. Because many areas do not have sufficient infrastructure to support swimming as an activity, drowning becomes a real threat (Hastings, Zaharon, and Cable 915). The strategy outlines ways in which it helps schools systems to meet the criteria that are listed in different programmes. One of the programmes is the â€Å"Every Child Matters† programme that supports the idea that schools should be a place in which life long skill sets and protections are created so that the child has the best possible chance at a good outcome as an adult. Swimming, according to the ASA helps to provide this programme with some of its goals through achieving systems that create activities for extended school programmes so that there are places for children to go outside of the regular school time period (ASA). Again, this does not address the nature of the contribution of water safety that will provide further protections and skill sets that can save lives. Other programmes such as â€Å"Aiming High for Young People† and â€Å"Physical Activity and Sports Strategy for Young People† are also addressed to emphasize the importance of swimming as an activity, rather than providing a skill set for safety (ASA). The problem with simply

The Comedy as a social criticism in The Cinema of Cantinflas Essay

The Comedy as a social criticism in The Cinema of Cantinflas - Essay Example The emergence of Cantinflas as an urban comedy provided a breakthrough for Mexican comedy (Hershfield, p.192). The basic theme for this comedy and all others in the time was social criticism. First, the comedy was presented in folkloric depictions that were targeting the local audience. Secondly, Mario Moreno, more popularly known as Cantinflas used a style that was well-known to the people to attract the audience he wanted to present his points. This made him popular among the Mexicans who took charge of his messages and acted on them. This paper is aimed at supporting the thesis that comedy as applied in the Cantinflas films and other Golden Age comedies in Mexico is a tool for social criticism (Shaw, p.68). Mario Moreno is a Mexican comedian is global known as the Cantinflas after his hilarious character he has portrayed in different films. He is represented in many of his films as a poor Mexican, who is overburdened by hard labor and poverty. In Ahà ­ està ¡ el detalle (There’s the Detail) (1940) he wears drooping pants that are held in position by a rope. His shoulders are free indicating that he is in a job to carry loads. This film, as interpreted by many analysts has the theme of poverty and oppression of the poor in Mexico (Hershfield, p.194). Cantinflas brings out this theme through the expression of poverty that he appears to be living in. The film criticises the social and political systems of the time that promoted the oppression of the poor in farms and their failure to help them rise from poverty. The folkloric depiction of most of the films during this time including those of Cantinflas and others like Allà ¡ en el Rancho Grande, despite providing the people with a social identity also gave them an extra thought. Most of the styles used were meant to keep away the foreigners from understanding the deeper meaning of the characterisation and the themes. This was an effort to have the Mexicans develop a home solution to